Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Inglewood?
Metal roof installation in Inglewood typically runs $14,500 to $31,000 for a standard single-family home, with most homeowners landing near $21,000 for a 1,600 to 2,000 square foot roof. That works out to roughly $9 to $16 per square foot installed, depending on the panel system, the pitch of your roof, and how much deck repair we find once the old material comes off. Homes near the coast in Morningside Park or along the hill streets of Ladera Heights often price at the higher end because salt air and marine layer moisture drive more prep work.
We put that range up front because you asked a direct question and deserve a direct answer. What follows is the line-by-line reason those numbers land where they do in Inglewood specifically, not a national average pulled from a cost aggregator. Chatham Roof Repair provides free estimates so you can see your own numbers before committing to anything.
Key Takeaways
- Most Inglewood metal roof jobs fall between $14,500 and $31,000, with $21,000 a common midpoint.
- Standing seam costs more than exposed fastener panels, but the gap narrows when you factor in maintenance over 40-plus years.
- Inglewood’s marine air and older housing stock add deck repair and underlayment costs that cheaper quotes tend to skip.
- A metal roof can earn you a discount on homeowners insurance in many carriers, and it outlasts asphalt by two to three times.
- The lowest bid is usually low for a reason. Ask what’s excluded, especially deck repair and flashing.
Metal Roof Installation Cost Breakdown (2026)
Here’s how the money actually splits on a typical Inglewood metal roof. These ranges reflect the local market in 2026 and assume a full tear-off of the existing roof, which is standard for a re-roof here rather than a layover.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Tear-off and disposal of old roof | $1,800 – $4,200 | More if multiple layers exist; many Inglewood homes built before 1970 have two or three. |
| Deck inspection and repair | $0 – $3,500 | Rotted sheathing is common near the coast; priced per sheet. |
| Underlayment and moisture barrier | $1,200 – $2,800 | High-temp synthetic underlayment recommended for metal. |
| Metal panels (material) | $5,500 – $13,000 | Exposed fastener is cheaper; standing seam is higher. |
| Panel installation labor | $3,500 – $7,500 | Steeper pitches and complex rooflines raise this. |
| Flashing, trim, and fasteners | $900 – $2,200 | Valleys, chimneys, and penetrations add cost. |
| Ridge, valley, and eave closures | $600 – $1,600 | Detail work that separates a lasting install from a leaky one. |
| Permits (City of Inglewood) | $350 – $900 | Re-roof permits vary with project valuation. |
| Final inspection and cleanup | Included | Magnet sweep for nails is standard, not a premium. |
What pushes a job toward the top of the range? Steep roof pitches above 8/12 slow every step and require added safety measures. Complex rooflines with multiple valleys and dormers multiply the detail work. And old homes with original skip sheathing, which is common in the blocks around downtown Inglewood built in the 1920s and 1930s, need full decking replacement before any metal goes down. What keeps a job near the bottom? A simple gable roof, a single layer of old asphalt to remove, and a straightforward panel choice like exposed-fastener corrugated.
What Affects Metal Roof Installation Pricing in Inglewood
- Panel system. Exposed-fastener panels are the budget path. Standing seam, where the fasteners are hidden under raised seams, costs 30 to 50 percent more in material but eliminates the exposed screws that eventually back out. For a city that sees marine layer moisture most mornings, the hidden-fastener approach holds up better over decades.
- Roof size and pitch. Square footage is the biggest single number, but pitch multiplies labor. A 4/12 pitch is comfortable to walk; a 10/12 requires staging, harnesses, and time. Steep roofs in the hillside sections of Inglewood take longer and cost more.
- Coastal exposure and salt air. Homes within a few miles of the coast, especially toward Morningside Park and the western edge of the city, get hammered by salt-laden air. We spec heavier-gauge panels and marine-grade fasteners here so the roof doesn’t chalk and fail early.
- Deck condition. The old roof hides its secrets until tear-off. Rotted fascia or soft sheathing commonly adds $1,500 to $3,500 on older Inglewood homes. A bid that doesn’t allow for this either hasn’t looked or plans to hand you a change order later.
- Permit and inspection requirements. The City of Inglewood requires a re-roof permit, and metal roofs need to meet wind and fire code for the area. Permit fees scale with project value, so a bigger job carries a bigger fee. We pull permits as part of the job, never as an afterthought.
- Penetrations and existing attachments. Every vent, chimney, and skylight is a place that can leak if the flashing detail is rushed. Older Inglewood homes sometimes carry satellite dishes, old antenna mounts, and multiple roof penetrations that all need proper metal flashing, not caulk.
It’s worth comparing material options carefully before you commit to metal at all. If the budget is tight and the roof is otherwise sound, an asphalt system might be the correctly-sized solution. We walk through that trade-off on our Metal Roof Installation in Inglewood page, and our full material lineup spans seven major manufacturers, GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so you’re choosing the product, not being sold one.
How Does Metal Compare to Asphalt in Inglewood?
A metal roof costs roughly two to three times what an asphalt shingle roof costs up front in the Inglewood market. An asphalt re-roof on a 1,800 square foot home typically lands around $9,000 to $13,000, while the metal equivalent runs $17,000 to $24,000. The math flips over time. Metal lasts 40 to 70 years compared with 15 to 25 for asphalt, resists the coastal moisture that shortens shingle life, and often earns a homeowners insurance discount for impact and fire resistance.
Homeowners weighing both should think about how long they’ll stay. If you’re selling in five years, asphalt may recover its cost at resale more reliably. If this is your long-term home, the metal roof wins on total cost of ownership, and it doesn’t need the periodic re-shingling an asphalt roof does. Our team handles both systems, so the recommendation follows what your roof needs and what your plans are, not a single product we’re pushing.
What about the noise and heat concerns?
Two questions we get on nearly every metal estimate. Noise is largely a myth when the roof is installed over solid decking and proper underlayment, which is the standard method in Inglewood. Rain on a properly built metal roof sounds about like rain on a shingle roof. As for heat, a lighter-colored metal panel with a reflective finish can actually lower attic temperatures compared with dark asphalt, which bakes under the Southern California sun. We spec cool-rated finishes that meet California’s Title 24 requirements and help with summer cooling costs.
How to Save on Metal Roof Installation
There’s no magic discount, but there are real ways to bring the number down without cutting corners that cost you later.
- Get three written estimates and compare line items, not totals. A cheaper total often just excludes deck repair or uses lighter-gauge panels. Compare what each bid actually covers.
- Choose exposed-fastener panels if budget leads. They cost less than standing seam and are perfectly serviceable on many Inglewood homes. We’ll tell you honestly whether the trade-off makes sense for your roof.
- Schedule in the dry season. Late spring through early fall is the busy stretch, but a job booked during a slower window sometimes gets better pricing and faster scheduling.
- Bundle deck repair into the initial scope. If we know the deck needs work, pricing it up front beats a mid-job change order. It also keeps the project on one timeline.
- Ask about insurance discounts. Many carriers reduce premiums for impact-resistant or fire-rated metal roofs. That’s a real, recurring savings that offsets part of the up-front cost.
- Get a free inspection before you decide anything. Sometimes the right answer is a repair, not a replacement. Call (866) 361-1724 and we’ll look before we quote.
We look for the repair before we recommend the replacement. If your current roof has years left in it, or a section can be patched, we say so. That’s the difference between a roofing company and a replacement sales operation. Start with a free estimate at Chatham Roof Repair and get straight answers about what your roof actually needs.
FAQs – Metal Roof Installation Cost
How much does a metal roof cost for a 1,500 square foot home in Inglewood?
A 1,500 square foot home typically runs $13,500 to $24,000 installed, depending on panel system and deck condition. Exposed-fastener panels sit near the low end; standing seam lands higher. Call (866) 361-1724 for an exact figure on your address, since roof footprint and pitch matter more than interior square footage.
Is a metal roof cheaper than asphalt in Inglewood?
No, metal costs roughly two to three times more up front, around $17,000 to $24,000 versus $9,000 to $13,000 for asphalt on a comparable home. It costs less over its lifetime because it lasts 40 to 70 years versus 15 to 25 for asphalt. Whether that up-front premium is worth it depends on how long you’ll stay in the home. Our team installs both and can walk you through the break-even math on your specific roof.
How long does metal roof installation take in Inglewood?
Most residential metal roofs take three to seven days from tear-off to final inspection, weather permitting. Larger or more complex roofs run longer, and coastal homes needing deck repair add a day or two. We give you a realistic schedule before we start, not an optimistic one to win the bid.
Do I need a permit for a metal roof in Inglewood?
Yes, the City of Inglewood requires a re-roof permit, and the fee typically runs $350 to $900 based on project valuation. A metal roof also has to meet local wind and fire code requirements. We handle the permit as part of the job so it’s done right and the inspection passes the first time.
Is it cheaper to repair my roof or install a new metal roof?
A targeted repair usually costs $400 to $2,000 and makes sense if the roof structure is sound and the damage is isolated. Full replacement with metal only makes sense when the roof is failing broadly or at the end of its life. That’s why we inspect first and quote second. Call (866) 361-1724 for a free assessment and we’ll tell you which side of that line your roof is on.
Will a metal roof lower my homeowners insurance in Inglewood?
Often, yes. Many carriers offer discounts of 5 to 35 percent on premiums for impact-resistant or fire-rated metal roofs. The exact figure depends on your carrier and policy. Ask your insurer about their metal roof credits, and keep the manufacturer documentation we provide, since the underwriter may want proof of the rating.
What Happens After the Estimate?
Once we’ve inspected and given you a quote, the next step is yours. If metal is the right call, we schedule the tear-off, order the panels from whichever of our seven manufacturers best matches your budget and warranty goals, pull the permit, and get to work. If a repair is the smarter move, we do that instead and save you the replacement cost entirely. Either way, you get one company from inspection through finished roof, no hand-off between the entity that finds the problem and the one that fixes it. That’s the whole point of the way we work.
Chatham Roof Repair is roofing-only, which means our entire crew and every material we stock are aimed at getting your roof right. We install products from GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, so you’re choosing the product that fits your roof, your budget, and your warranty goals rather than taking whatever a single-brand shop pushes. Seven major brands, real options, and a scope of work built on what the inspection actually found.
Ready for a number you can plan around? Call (866) 361-1724 for a free estimate. We’ll inspect your roof, explain what it needs in plain terms, and give you a written quote for metal installation or a repair, whichever makes sense for your home. Straight answers, no pressure, and a clear scope before a single nail is pulled.
Pricing reflects the Inglewood market as of 2026. Chatham Roof Repair offers free estimates – call (866) 361-1724.
Written by the team at Chatham Roof Repair, serving Inglewood, CA.
What Our Customers Say
"Added a ridge vent and cleared the blocked soffit vents. Attic temperature in the summer dropped noticeably and the upstairs is livable now."
— Emily Chen"Tile roof, three cracked tiles and a slipped one. Matched the tile, no color mismatch, and it took him half a day."
— Daniela Delgado"Leak over the kitchen turned out to be a cracked boot around a vent pipe, not the roof itself. He showed me the photo from up there and replaced the boot for a couple hundred dollars. The company before him had quoted a full tear off."
— Brooke Norris