Architectural shingles
Metal roofing
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with






See the difference
Before
After
Before
After
Before
AfterGutter installation in Inglewood typically costs $1,450 to $4,800 for a full single-story home, with most homeowners landing in the $2,100 to $3,200 range. The price depends on linear footage, material, stories, and how much fascia and roofline repair the job needs before a single hanger goes up. Below are the real 2026 numbers we see on Inglewood homes, broken out line by line so you can budget without guessing.
We’re Chatham Roof Repair, and our work is roofing from inspection through repair and replacement. Gutters sit at the roof edge, so we spend a lot of time diagnosing the fascia, drip edge, and downslope conditions that determine whether a gutter job is a simple swap or a structural repair. If you want the full service picture, start with our Gutter Installation in Inglewood page, and keep this guide open for the pricing detail.
How Much Does Gutter Installation Cost in Inglewood?
A standard 150- to 200-linear-foot gutter replacement on a one-story Inglewood home runs $1,450 to $3,200. Two-story homes, homes with long runs, and homes needing fascia repair climb to $3,200 to $4,800 or more. Seamless aluminum is the most common choice here and the most cost-predictable.
Those numbers include tear-off of the old system, new hangers, downspouts, and cleanup. They don’t include rotted fascia replacement or roof-edge repairs, which we price separately after inspection because the scope depends entirely on what’s underneath the old gutter.
Key Takeaways
- Most Inglewood single-story gutter jobs land between $2,100 and $3,200.
- Seamless aluminum is the value leader at roughly $7 to $13 per linear foot installed.
- Fascia repair adds $400 to $1,800 depending on how much wood has failed.
- Two-story access adds roughly 15 to 30 percent to labor.
- Every quote from us starts with an inspection, so you’re not paying for gutter work you don’t need.
Gutter Installation Cost Breakdown (2026)
Here’s how the numbers stack up for a typical Inglewood job in 2026. These ranges reflect local labor rates, material availability in the South Bay, and the mix of older housing stock we work on.
| Line Item | Typical Cost Range | Notes |
|---|---|---|
| Seamless aluminum gutter (per linear foot, installed) | $7 – $13 | Most common choice; formed on-site |
| Galvanized steel (per linear foot, installed) | $9 – $15 | Heavier, holds up to debris impact |
| Copper (per linear foot, installed) | $28 – $48 | Long lifespan; premium aesthetic |
| Downspouts (each, installed) | $90 – $220 | Depends on length and story count |
| Gutter guards / leaf protection (per linear foot) | $6 – $22 | Wide range by system type |
| Tear-off and disposal of old gutters | $180 – $450 | Higher for painted or fastened systems |
| Fascia board repair (per linear foot) | $12 – $28 | Only if wood has softened or rotted |
| Drip edge replacement (per linear foot) | $3 – $8 | Protects the roof edge and sheathing |
| Two-story access surcharge | +15% – 30% | Ladder work, staging, safety setup |
What pushes a quote toward the top of those ranges? Wood damage is the biggest single driver. In Inglewood, a lot of the housing stock dates to the 1920s through the 1960s, and fascia behind an old, leaking gutter is often soft. We can’t hang a new gutter on compromised wood and expect it to hold through the winter rains. That repair, when needed, is the difference between a $1,800 job and a $3,600 job.
Material choice is the second driver. Copper can run three to four times the cost of aluminum. For most Inglewood homes, aluminum is the right call unless the house has architectural detail you’re trying to match or you want the longest service life available. We install roof and edge materials from seven major brands, including GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral, and we match profiles to the existing roofline rather than forcing a one-size option.
What Affects Gutter Installation Pricing in Inglewood
- Linear footage of the roofline. A small bungalow in Morningside might have 120 feet of gutter; a two-story home near Centinela might have 240. Footage is the base multiplier for everything else.
- Story count and access. Two-story and hillside homes need staging, longer downspouts, and more careful ladder setup, which adds roughly 15 to 30 percent to labor. Roofs with steep pitch and tight side-yard clearances slow the work further.
- Condition of fascia and drip edge. Soft or rotted wood has to come out before new gutter goes on. We inspect the roof edge as part of the gutter assessment, so the repair is priced accurately and not buried in a surprise line item later.
- Material and profile. Aluminum, steel, and copper price very differently, and so do K-style versus half-round profiles. Half-round is more common on older Inglewood homes with period detail, and it costs more to form and hang.
- Gutter guards and downspout count. Leaf protection is optional but can save years of cleaning. The number of downspouts needed depends on roof area and how water needs to be routed away from the foundation.
- Local rainfall patterns. Inglewood sits in a coastal-influenced basin where most of the annual rain arrives in a handful of concentrated winter storms. Systems need to move a lot of water fast during those events, which means correct sizing and enough downspouts matter more than average annual rainfall suggests.
One more factor specific to this area: many Inglewood homes were built with older drainage arrangements, and downspouts sometimes discharge straight onto a walkway or into a planter instead of away from the foundation. Correcting that routing is part of a proper gutter job and can add a modest amount to the total, but it’s what prevents the soil and foundation problems that show up years later.
How to Save on Gutter Installation
The single biggest way to save is to catch the problem before the fascia fails. A gutter that’s pulling away at the hangers, or one that overflows in a light rain, is a warning. Replacing it early is a $1,800 to $2,400 job. Replacing it after two wet seasons of overflow has rotted the fascia and stained the stucco is a $3,500-plus job. The repair-first approach is cheaper because it addresses the actual failure, not the downstream damage.
A few practical moves that lower the number:
- Bundle the work. If the roof edge or drip edge needs attention anyway, handling it during the gutter job avoids a second mobilization and a second set of access costs.
- Choose the profile that fits. Matching your existing gutter style and matching your roof system is often cheaper than a custom option, and multi-brand capability means we can often match the existing roof’s profile and color without special order pricing.
- Skip guards if you’re not surrounded by trees. Leaf protection makes sense near mature ficus, pine, or eucalyptus. On a clean roofline, it’s an optional add you can defer.
- Get the inspection before the quote. A quote built on what’s visible from the ground can miss soft fascia. An inspection-first estimate means the number you get is the number you pay.
- Schedule outside the storm rush. Gutter work booked in late spring and early fall is easier to schedule than work booked after the first big rain, when everyone discovers their gutters at once.
Free estimates are part of the deal here. Call (866) 361-1724 and we’ll walk the roof edge with you, show you what we see, and give you a written range before any work begins.
Is Gutter Work Something a Homeowner Should DIY?
No. Gutter replacement involves working at the roof edge, often on a ladder, and attaching hangers into fascia that may be softer than it looks from the ground. The failure mode isn’t a cosmetic mistake; it’s a fall. We don’t give step-by-step installation directions for that reason. But you can absolutely do the diagnostic part yourself, and it will save you money.
Here’s what to check from the ground, with binoculars or a phone camera zoomed in:
- Gutter sections pulling away from the fascia, or hangers visibly backing out.
- Staining or peeling paint on the fascia board directly behind the gutter.
- Water overflow marks (mud streaks, mineral deposits) on the exterior wall below the gutter line.
- Downspouts that discharge onto pavement or into planting beds right against the house.
- Granule loss or sagging at the roof edge, which can indicate the drip edge needs attention too.
If you spot any of those, get a professional out to look. That’s the point where the repair-first inspection pays for itself, because you learn what’s actually wrong before you commit to a scope. Our team handles the roof-edge side of that assessment, and we coordinate the gutter work so there’s no gap between the roofing contractor and the gutter crew.
Why We Look at the Roof Before We Quote a Gutter
Gutters and roofs share an edge, and problems migrate in both directions. A failing gutter wets the fascia and the roof sheathing at the eave. A failing drip edge sends water behind the gutter, which then rusts or pulls the hangers. If we quote a gutter without looking at the roof edge, we might install a perfectly good system that fails in eighteen months because the water is still getting behind it.
That’s why every estimate starts with an inspection. It’s the same reason our company is built around diagnosis-first roofing: inspection pinpoints the problem, repair addresses it precisely, and full replacement happens only when the repair can’t do the job. Straight answers about what your roof edge actually needs, and what it doesn’t, are worth more than a fast quote. You can read more about how we approach the broader picture on our home page.
Inglewood homes also tend to have had work done over the decades – a re-roof here, a patch there, a gutter swapped by a previous owner. Mismatched profiles and hanger spacing are common. When we replace, we match the existing roof system’s profile and color wherever possible, using our seven-brand supply (GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, Boral), so the finished install looks intentional rather than pieced together. Multi-brand access matters here: it keeps you from being forced into a single product line that may not match your existing roof or your warranty class.
FAQs – Gutter Installation Cost
How much does gutter installation cost in Inglewood in 2026?
Most Inglewood homes fall between $1,450 and $4,800, with a typical single-story job landing at $2,100 to $3,200 for 150 to 200 linear feet of seamless aluminum. Two-story homes and jobs requiring fascia repair push toward the top of that range. Call (866) 361-1724 for an exact quote – estimates are free.
Is it cheaper to repair my existing gutters or replace them?
Repair is cheaper when the failure is isolated – a loose section, a few bad hangers, one leaking joint – and typically runs $150 to $600. Once more than about a third of the run is failing, or the fascia is soft, replacement is the better value because you stop paying for repeat repairs on a system that’s past its service life. We’ll tell you which side of that line your gutters are on.
How much does fascia repair add to a gutter job in Inglewood?
Fascia repair adds roughly $400 to $1,800, depending on how many linear feet are soft. Older Inglewood homes from the 1920s to 1960s are the most likely to need it, because a leaking gutter can wet the same board for years before anyone notices. We price it separately so you can see exactly what the repair costs.
Can you install gutters the same day?
Same-day installation is possible on straightforward single-story jobs when the materials are in stock, though most jobs are scheduled within a few days of the estimate. Jobs requiring fascia repair or custom profile matching take longer because the woodwork and material prep come first. Inglewood homes with period half-round profiles may need a short lead time for forming.
Do I need gutter guards in Inglewood?
Guards are worth it if you have mature trees overhanging the roofline – ficus, eucalyptus, and pines are common here and drop debris year-round. Without tree cover, guards add $6 to $22 per linear foot for protection you may not need. We’ll tell you honestly which side of that you’re on rather than upselling a system your roof doesn’t require.
How long do new gutters last in Inglewood?
Seamless aluminum typically lasts 20 to 30 years here; copper can last 50 or more. The Southern California climate is gentle on metal compared to freeze-thaw regions, so hanger integrity and fascia condition matter more than corrosion. A properly hung aluminum system on sound fascia is a 20-year-plus investment.
Get a Straight Answer on Your Gutter Cost
If you’re in Inglewood and trying to figure out whether you need a repair, a partial replacement, or a full gutter install, the fastest path to a real number is an inspection. We’ll look at the roof edge, check the fascia and drip edge, and give you a written range with the line items broken out. No pressure toward the most expensive option, because the scope follows what we find.
Call (866) 361-1724 for a free estimate. We serve homeowners across Inglewood and the surrounding South Bay, and we’re roofing-exclusive – inspection, repair, and replacement under one roof, with seven major brands to choose from so the product fits your home and your budget.
Written by the team at Chatham Roof Repair, serving Inglewood, CA. Pricing reflects the Inglewood market as of 2026. Chatham Roof Repair offers free estimates – call (866) 361-1724.
What Our Customers Say
"He told me my roof had another five or six years in it and I should not replace it yet. He was standing there with a quote pad in his hand. That's why I'll call him when it's time."
— Colleen Thompson"Flashing where the roof meets the chimney had never been done right by the original builder. He rebuilt it properly with step flashing instead of just running a bead of caulk over it like the last two people did."
— Brandon Kim"Quality work on the repair. There were a few nails left in the driveway that the magnet missed, so check yours before driving over it. Otherwise no complaints."
— Andres Martinez