GAF Roofing in Beverly Hills, CA

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

GAF Roofing in Beverly Hills, CA | Chatham Roof Repair

We’re an independent GAF roofing service provider working throughout Beverly Hills, and the short answer is this: we service, repair, and replace every major GAF system, from Timberline HDZ shingles to EverGuard TPO and Rubbertite coatings, with genuine GAF components where the system’s performance depends on it. What makes our GAF work different here is that we understand what Beverly Hills roofs actually hide. Original 1950s tar-and-gravel decks still sit under newer coatings all over the flats, street trees clog flat-roof drains, and the hills fire codes add a layer of review most roofers never mention. Call (866) 361-1724 for a free estimate, and we’ll tell you exactly what your roof does and doesn’t need. No guesswork, no upsell.

Call (866) 361-1724

For broader context on how GAF sales & service works with our inspection-first approach, see our brand overview.

Why Beverly Hills Residents Choose Us for GAF Service

Nelson Quarry grew up in the Morningside Park neighborhood of Inglewood, and he’s spent the better part of three decades watching what Southern California sun, Santa Ana winds, and the occasional El Niño winter do to a roof that wasn’t installed right the first time. He picked up the fundamentals at Los Angeles Trade-Technical College, then spent years doing field work across the South Bay before our team settled into this work full-time. That’s the experience behind every GAF in Century City and Beverly Hills job we do.

The practical side matters too. We work on GAF repair in West Hollywood and Beverly Hills every week, so we know how Timberline shingles hold up on low-pitch accent sections and how EverGuard TPO performs on flat decks under intense summer UV. More importantly, we know what fails and why. We use genuine GAF components, including Timberline shingles, EverGuard membrane, Pro-Start starter strip, Seal-A-Ridge caps, and WeatherWatch leak barrier, for anything carrying a system’s integrated performance. We specify aftermarket flashing and fasteners only where the spec allows it. Mixing brands mid-system is where watertightness and warranties break down, and we don’t do that to a customer’s roof.

One company handles inspection, repair, and full replacement. That means when we find a problem, we’re also the crew that fixes it. There’s no hand-off gap between the entity that diagnoses and the one that swings the hammer.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Common GAF Roofing Problems We Solve in Beverly Hills

Here’s what we see repeatedly on GAF systems across Beverly Hills. Every one of these has shown up on a roof we’ve worked on:

  • Brittle, checked Rubbertite and liquid topcoats over original tar-and-gravel decks. Years of intense summer UV bakes the coating until it checks and blisters, while the old built-up felt underneath stays saturated. A coating patch buys a season or two at best. We tell owners that straight.
  • Timberline HDZ granule loss and nail-line leaks on shallow-pitch accent sections. Blown leaf litter and ficus debris trap moisture on the low slopes of custom rebuilds. The shingle didn’t cause the leak; it’s the debris load and the pitch. We’ll tell you which problem you actually have.
  • Ponding at flat-roof drains clogged by eucalyptus and ficus litter. The drain, not the membrane, is usually the failure. Water backs up under the WeatherWatch laps at the perimeter, and suddenly a GAF membrane that’s still in good shape is leaking at the edges.
  • Santa Ana wind-driven rain finding ridge cap and step flashing joints on shallow-slope additions. The GAF accessory stack, including Seal-A-Ridge and flashing details, has to be rebuilt properly, not patched with caulk and hope.
  • Failed underlayment laps around scuppers on hillside properties. Brush debris and wind-driven rain work the laps loose over time. We rebuild the accessory stack correctly so the membrane has a fighting chance.

If you’ve got a leak, call (866) 361-1724. We’ll find the actual source before we quote you a repair.

GAF Service in Beverly Hills: What Local Conditions Mean for Your Equipment

Here’s the thing about Beverly Hills that changes how GAF roofing work plays out: in the flats, a re-roof quote on a 1950s-60s home often becomes a full tear-off the moment we probe the deck. Why? Because the original tar-and-gravel is frequently still sitting under a newer GAF coating. A prior owner rolled Rubbertite over it ten or fifteen years ago, the coating looked fine from the ground, and now the felt beneath is saturated after a few winter storms. You can’t fix that from the top. And in the hills, the same job trips the fire department’s brush-clearance and ignition-resistant roofing review on top of Building & Safety’s flat-roof drainage standards. That’s two separate approval layers, not one, and they don’t always agree on what they want. A generic GAF page won’t tell you that. A generic city page won’t either. This is Beverly Hills-specific, and it changes the scope, the schedule, and the price of any significant job.

On a mid-century flat-roof home off North Rexford Drive in the flats, our crew pulled back a GAF Rubbertite coating a prior owner had rolled over the original tar-and-gravel and found the felt beneath saturated after a winter storm ponded at a leaf-clogged drain—similar to what we see on GAF service in Culver City. We tore off to the deck, rebuilt the slope and drain, and laid a new GAF EverGuard TPO membrane with fresh flashing. No more ponding, and the flat roof finally drains the way it should. That’s what a real repair looks like.

A roof doesn’t lie, it just takes a while to tell you what it knows.

GAF Models & Products We Service in Beverly Hills

We work on the full GAF lineup that shows up on Beverly Hills homes:

  • Timberline HDZ and Timberline UHDZ architectural shingles on pitched accent sections and some full pitched roofs.
  • EverGuard TPO single-ply membrane on flat and low-slope sections, including mid-century homes and newer custom builds.
  • Rubbertite and GAF liquid-applied roof coatings on older flat decks, where we evaluate honestly whether a coating is a real fix or just a temporary bandage.
  • Pro-Start starter strip, Seal-A-Ridge caps, and WeatherWatch leak barrier in the accessory stack, where most leak repairs actually live.

We stock common GAF components locally so we’re not waiting on a warehouse to schedule your Beverly Hills repair. For full replacements, we order the system as a matched set, profile to manufacturer coverage, so your roof isn’t a patchwork of mismatched brands and warranty gaps.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

GAF Service Pricing in Beverly Hills

Flat-roof GAF sealing or small patch runs $350-$650, while a leak repair with deck repairs or limited membrane replacement lands between $450-$1,100. Large flat-roof patches or isolated drain rebuilds run $1,000-$3,000. Full flat-roof re-cover or acrylic coating over a sound deck starts at $4-$6 per square foot, and a complete flat-roof tear-off with new membrane sits at $9-$14 per square foot. Shingle roof replacement runs $7-$12 per square foot. A roof inspection costs $150-$350, waived when we do the work.

What drives the cost in Beverly Hills is what’s under the surface: hidden tar-and-gravel decks, fire-zone requirements in the hills, tree debris that’s been clogging drains for years. Your free estimate includes a physical inspection, honest findings, and a written line-item quote with no change orders unless the deck reveals something nobody could see from the surface. Call (866) 361-1724 to schedule yours.

Serving Beverly Hills, CA — Our Local Coverage Area

We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – GAF Roofing in Beverly Hills

Service Areas Near Beverly Hills

We handle GAF service throughout the wider Los Angeles area, including Beverly Hills service area coverage and nearby communities. We also work regularly in Inglewood, Ladera Heights, View Park-Windsor Hills, and Westmont. For GAF work in adjacent cities, see GAF service in Lynwood or GAF service in Torrance.

Book Your GAF Service in Beverly Hills Today

Call (866) 361-1724 and we’ll schedule a free estimate, inspect the roof, and give you a written quote that tells you exactly what your GAF system needs and what it doesn’t. Same-day scheduling is available on most weeks.

Written by Nelson Quarry, Owner at Chatham Roof Repair, serving Beverly Hills and the surrounding Los Angeles area.

Need Roofing help in Beverly Hills? Licensed & insured · Free written quotes response · free estimates
Call (866) 361-1724
Areas We Serve

Request a Free Estimate in Beverly Hills

Tell us what you need — Chatham Roof Repair responds fast. No obligation.

By requesting your free estimate, you agree to the terms of our Privacy Policy and consent to receive communications by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch